|LX12 Premium||LX14 Premium||LX20 Premium|
|Thickness (in)||12 mm||14 mm||20 mm|
|Thickness Tolerance (mm)||11.2-13.2||13-15||18.9-21.3|
|Lead Equiv. (mmPb)||1.6||2.0||3.0|
|Minimum Density (gm/cm3) LX Protective Sheet Glass||4.3
|Weight -- lb/ft2||43||51||76|
|X-Ray Peak Voltage KV||150||150||200|
|Max. available size||48"*96"||48"*96"||48"*96"|
MAINTENANCE & CLEANING INSTRUCTIONS FOR X-RAY SHIELDING LEAD GLASS PRODUCTS
As a high lead content glass, LX glass is more susceptible to staining as compared with normal window glass. Pay attention to the following precautions for installation and cleaning.
Do not stick anything on the surface of the LX glass during the installation. (When masking tape is used in caulking, remove it immediately after caulking and wipe off any tapetraces with alcohol.)
Do not use a wet cloth or water to clean the LX glass. Immediately wipe off water in case the LX glass becomes wet.
When the LX glass becomes dirty of marked with fingerprints, polish the surface slightly hard with a dry, clean cloth like gauze using alcohol. Wipe the LX glass again afterwards with a new, dry and clean cloth to completely remove the alcohol remaining on the surface.
Technical Glass Products only supplies LX Premium and X-Ray Shielding Lead Glass west of
Due to the specialized nature of LX Premium, all glass must be cut to finished size at the factory. Please contact SHT regarding lead-time for your project.